lamps. Sunday , March 12th , 2017 - 20:20:34 PM
There are also different ways of making the antler lamps themselves. Some lamp makers use glue to hold the antlers together. Others may fasten them together with a rawhide thong for a rustic Indian look. And some of the most attractive antler lamps may use a combination of being glued, drilled and screwed together, with the holes closed up for a natural look. High end lamps will almost always include rawhide lamp shades.
Assess the connectors at least once a month if it is installed properly. Examine wire leads and observe for abrasions and signs of damage. Corrosion in sockets means that these should be replaced. Never touch glass components of a plug in hanging lamp with your bare hands. Always use a cloth when handling. Check all mounting hardware to make sure that the whole light fixture is secure in the hanging position.
If the corrosion is only minor or just starting, you may scrub it off using fine sand paper. Dust out the lens tube and reassemble the lens barrel. You may consider disassembling then reassembling the unit every quarter to ensure that all parts of your plug in hanging lamp are in good condition and working properly.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Host Coupon claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.