lamps. Tuesday , April 04th , 2017 - 10:20:33 AM
Cut the mica sheets into the desired measurement. Slip it into the metal lampshade or fit into desired areas. Hold mica sheets in place with glue or tape or if you have tabs at the back of the fold, fold them in to hold the sheet in place. Mica lamp shades can be designed by using circular or square or even rectangular shaped rims.
You need to make your post lamp a "smart post lamp." Find the wall switch that controls the post lamp. Replace it with smart switch module. You can still turn it on and off by pushing the switch. But now you can also send a remote command to control the switch. You need a "controller" module that will send your command to your smart switch. If you already have a home wireless network and Internet service, find a wall outlet near your router. Connect the router to the controller using an Ethernet cable. Plug the controller module into the wall outlet and you're ready to go.
If the corrosion is only minor or just starting, you may scrub it off using fine sand paper. Dust out the lens tube and reassemble the lens barrel. You may consider disassembling then reassembling the unit every quarter to ensure that all parts of your plug in hanging lamp are in good condition and working properly.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Host Coupon claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.