lamps. Wednesday , March 01st , 2017 - 08:20:42 AM
Take 3 hanger pieces which have been put to the same measurement. Taking a separate hanger bend it to the shape of a small circular, large enough to rest on the bulb rim. You can attach these by using thick wire and then attach it to the lower rim. Then place it on the blub rim. Make sure it is properly balanced. Now take the mica sheets and drill small holes in the corners each sheets (4 holes). Taking 3 inch sections of craft wire attach the mica to the rims, both up and down. Check if it is firmly placed. And now you have your very own home made mica lamp shade. You can use stencils and paint on your lampshade to add a little bit of color if you desire.
You need to make your post lamp a "smart post lamp." Find the wall switch that controls the post lamp. Replace it with smart switch module. You can still turn it on and off by pushing the switch. But now you can also send a remote command to control the switch. You need a "controller" module that will send your command to your smart switch. If you already have a home wireless network and Internet service, find a wall outlet near your router. Connect the router to the controller using an Ethernet cable. Plug the controller module into the wall outlet and you're ready to go.
Using the replacement lamp shade that you fall in love with is a great way to start giving your room a whole new feel to it. You never know what you will end up with when you start looking at all of your different options.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Host Coupon claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.